A lot of households require a reliable Jenn Air refrigerator that is able to offer plenty of Ice. An ice maker that is functional is an essential appliance that can make ice for all occasions. However, Jenn Air fridges that stop producing ice can become frustrating and inconvenient. There are many reasons that your Jenn Air refrigerator won’t make the ice you want. This could be due to a blocked water pipe or a malfunctioning ice maker. In this post we’ll look at the common causes of this problem and give you step-by-step instructions for fixing the Jenn Air refrigerator not making the ice. With the information and guidance provided it will be possible to identify the problem and get your refrigerator back to producing ice within a matter of minutes.
Common solutions to the problem: My Jenn Air Refrigerator isn’t making ice
Jenn Air Refrigerator’s Main Control Board
The Jenn Air refrigerator’s main control board controls the voltage going to the Ice Maker. The ice maker may cease to function when the control panel isn’t in good condition. Examine the board for signs of damage, or an issue with the component. After looking at the wiring diagram for the Jenn Air refrigerator, you may also use a multimeter. Freezer Temperature is Above 10 degrees F (-12C) If the freezer temperature is higher than 10°F (-12C) and the ice maker will not produce ice cubes efficiently. The ice maker must be operating between 0 and 5°F (-18 to 15C). To ensure the ice maker works correctly, the temperature of the freezer must not be higher than 5°F (-18 to 15C). Also, you should look for the presence of frost on the coils of the evaporator. The defrost mechanism could have failed in the event that the evaporator coils have are covered in ice.
Jenn Air Refrigerator Water Inlet Valve
The water inlet valve is an electrically-controlled valve that opens to supply water to the dispenser and ice maker. The water inlet valve can be damaged or may not have pressure enough to allow water to flow. This means that the Jenn Air Jenn Air icemaker won’t make the ice. The valve requires minimum 20 PSI in order to function properly. You must ensure that the water pressure is at or below 20psi. You can check the power source to the valve that supplies water with a multimeter to determine if the pressure of water is sufficient. If the water supply valve is supplying sufficient power and pressure, but the icemaker won’t make ice due to the lack of water, it must be replaced.
Jenn Air Refrigerator Ice Maker Assembly
A part of the assembly might be damaged. Since many of the ice maker components aren’t sold separately, you may need to purchase and replace the whole Jenn Air ice maker assembly. Before replacing an assembly of ice makers, make certain to check the water line, the water inlet as well as the fan and water heater. If none of these parts are defective and the temperature of the freezer is at least 15 degrees Fahrenheit, replace the ice maker assembly. The water supply in the water supply to your home might have low pressure in the water supply. The water inlet valve supplies water to the water dispenser as well as the ice makers. Water inlet valves must operate at minimum 20 psi. You can test the flow of water and find out the pressure by testing it. Verify that the Jenn Air Icemaker is on Check that the Jenn Air Icemaker is turned on and the paddle or arm is able to move freely. For models with ice dispensers in the door when the door is open, ensure that the indicator light is in constant motion when the ice dispenser flap and door switch are both pressed. Jenn Air Refrigerator door switch The door switch turns off the water and Ice dispenser when the Jenn Air refrigerator’s door is opened. If the door switch is not working and the dispenser doesn’t turn on. A multimeter can be used to test for continuity to find out if the door switches are damaged. If the switch doesn’t have continuity when activated, replace it.
Jenn Air Refrigerator’s Ice Level Control Board
Some Jenn Air refrigerators use an infrared beam to determine the level of the ice within the bucket. When the ice levels reach the top of a bucket, the infrared beam ceases to function. The control board then stops the maker of ice. The control board tells the ice maker that the ice layer is dropping to below the beam. If the ice level control board is damaged then the ice maker will cease making ice. Check that power is available to the ice control board. Replace the control board for the ice maker in the event that power isn’t being received by the ice level control board.
Jenn Air Refrigerator Water Filter
A blocked water filter could hinder the flow of water to the dispenser, preventing the ice maker from working properly. The water quality and the proper flow should be ensured by the water filter, which is replaced every six months.
Jenn Air Refrigerator Auger Motor
For many Jenn Air refrigerators to properly dispensing the ice the auger motor is used to spin an auger blade to push the ice out of the ice bucket and down the chute of the dispenser. If the auger motor is burned out or defective the ice will not move forward and fall through the chute which can give an impression that the ice maker is not working. Take out an ice bucket to check if the motor is functioning properly. Turn the bucket’s auger by using your hands. A multimeter is a good tool to check the electrical continuity of the auger motor if the auger is able to rotate freely. If the motor doesn’t work or isn’t powered then replace it.
Jenn Air Refrigerator Ice bucket
A lot of Jenn Air refrigerators have a separate motor to spin an augerblade and push the ice out of the bucket into the chute. The ice bucket could be damaged if the auger motor ceases to spin and the ice doesn’t disperse. Examine the ice bucket, auger and drive coupler for cracks or excessive wear. Replace the ice bucket when needed. A Jenn Air refrigerator that isn’t producing ice is a frequent problem. There are a variety of reasons for this. There are a variety of solutions to help the appliance to make ice once more. If you follow the steps that are provided in this article, you will be able to identify the issue and make the necessary repairs without needing professional help. Regular maintenance, such as cleaning out the icemaker and making sure that the water line does not get blocked can prevent future issues and help ensure that your Jenn Air refrigerator operating smoothly. If you find yourself in need of ice, don’t be hesitant to take action and get your Jenn Air refrigerator functioning once more.