Beko refrigerators are durable and provide lots of ice. An ice maker that is functional is an essential appliance that can make ice for all occasions. However, Beko fridges that stop making ice can be annoying and uninspiring. There are a variety of reasons why your Beko refrigerator could not produce the ice you need.
This article will explain the causes and give you steps to follow in order fix a Beko refrigerator that’s not making ice. The advice and information will allow you to identify the problem quickly and fix your refrigerator to make ice once more.
Common solutions to: My Beko Refrigerator isn’t making ice
Beko Refrigerator’s Main Control Board
The Beko refrigerator’s main control board regulates the voltage that goes to the Ice Maker. The icemaker might stop working if it isn’t in good condition. You can examine the control board for indications of wear or damage, or for a damaged component. After reviewing the wiring diagram for the Beko refrigerator, you can use a multimeter or a magnifying glass to check whether there is enough voltage to the ice maker. Freezer Temperature is Above 10 Degrees F (-12C) If the temperature of the freezer is higher than 10 degrees Fahrenheit (-12C), the ice maker won’t produce ice cubes efficiently. To ensure that the ice maker functions correctly, the temperature of the freezer should not exceed 0°F (-18°F to -15°C). If the freezer temperature is too high, ensure that the condenser coils are clear of debris and the condenser fan is working properly. You should also check for frost accumulation on the coils of the evaporator. If the evaporator tubes are frozen, it is likely that a component of the defrost mechanism has failed.
Beko Refrigerator Water Inlet Valve:
The water inlet valve is an electrically-controlled valve that opens to supply water to the dispenser and ice maker. If the valve for water is damaged or has too little pressure, water won’t flow through. This means that the Beko Beko Icemaker will not produce ice. To work properly, the valve must be at least 20 psi. Check that the water pressure in the valve isn’t less than 20 psi. To confirm that the water pressure to the valve is sufficient, you can use a multimeter. If the water valve is receiving enough power and pressure, however, the ice maker fails to produce ice, you should replace the valve.
Beko Refrigerator Ice Maker Assembly
A component of the assembly may be damaged. Because a lot of the ice maker components are not available separately, you might require replacing the whole Beko ice maker assembly. Before installing the ice maker, check the water inlet valve, the water line, and fan. If any of these parts fail, and the temperature of the ice is below 15°F (or less), replace the icemaker assembly.
Low pressure water from the house Supply:
The home might not have enough water pressure. The valve that supplies water to the water supply provides water to the water dispenser and ice maker. For the water inlet to work properly, it must be at least 20 PSI. You can check the water flow and find out the pressure by testing it.
Confirm icemaker “On”:
Make certain the Beko is switched on and the paddle or arm is able to move freely. On in-door ice-dispensing models, with the door open ensure that the indicator light stays in constant motion as the flap for the ice maker and switch for the door are both pressed. Beko Door switch for refrigerators: The door switch switches off the water and Ice dispenser once the Beko refrigerator’s door is open. The dispenser won’t start if the door switch malfunctions. To find out if the door switch is damaged, use an instrument to check for continuity. Replace it if you find that the switch doesn’t have continuity when activated.
Beko Refrigerator Ice Level Control Board:
Some Beko refrigerators utilize an infrared beam to sense the amount of ice present in the bucket of ice. If the ice level is at the maximum level of the bucket, it stops the infrared beam. The control board shuts off the maker of ice. When the ice level drops below the beam, the control board signals the maker to create more ice. The ice maker will cease making ice when the ice level control board is not functioning. Check that the power supply to the ice level control panel is working. Replace the ice-maker control board in the event that power isn’t being received by the ice level control board.
Beko Refrigerator Filter for water:
Blockages can block water flow to the dispenser, which can cause the maker of ice to stop working. The water filter must be replaced every six months to maintain the proper flow of water and to make sure that the water is of good quality. Beko Refrigerator Auger Motor: In many Beko refrigerators to properly dispense ice the auger motor is used to rotate an auger blade to move the ice out of the ice bucket and into the chute of the dispenser. If the auger motor is damaged or burned out the ice will not be able to move forward or fall down the chute which can give the impression that the ice maker is not functioning properly. Take out an ice bucket and check if the motor is working properly. Turn the bucket auger manually by using your hands. If the auger turns freely, you can use a multimeter to test the auger motor for electrical continuity. If the motor isn’t working or isn’t powered, replace it.
Beko Refrigerator ice bucket:
A separate auger motor rotates an auger blade to push the ice out from the bucket and down into the chute for dispenser. The ice bucket could be damaged if the auger motor ceases to spin, but the ice does not disperse. Inspect the auger, ice bucket, as well as the drive coupler, for wear or cracks. Replace the ice bucket when needed. The common problem of the Beko refrigerator not producing ice could be due to many reasons. There are a variety of ways to get your appliance producing the ice it needs, such as the blockage of the water line, faulty the ice maker, or thermostat issues.
You can identify the issue yourself by following the steps in this post. Regular maintenance, such as clearing the ice maker of debris and ensuring that the water line isn’t blocked, can help prevent future issues and make sure that your Beko refrigerator is operating smoothly. If you find yourself having a need for ice don’t hesitate to act quickly and get your Beko refrigerator working once more.