Gas range ovens are a common feature for many families, providing reliable cooking capabilities and providing delicious meals for years. They are susceptible to issues with time, just like any other appliance. One common issue that may arise is an issue with the Crosley oven control board. It is the component that regulates the oven’s temperature and timer. This can make your oven inoperable or even difficult to use. With the help of a few tools and understanding, it is easy to replace the Crosley control boards at your home. This article will show you how to replace the Crosley gas cooker control board so that you can return quickly to cooking your favorite meals.
Instructions
1. To prevent scratches to the floor, unplug the Crosley range. Take the range out of the cabinet and disconnect the power cord. Turn off the gas source. Use a helper if necessary.
2. Take off the Crosley control panel shield back shield.
3. Take off the Crosley oven control board Make a digital image of the wires that are attached to the control board to document their locations so you can connect the wires to the new oven control board in the same method. All wires should be removed from the control board for the oven. Take out the screws for mounting and then remove the oven control board from the control panel.
4. Attach the overlay onto your new Crosley oven controller board. If the overlay on your existing oven controller board is in excellent condition and you want to use it on the new control board carefully remove the overlay using a putty knife. It is possible to attach the overlay to your new Crosley oven control board, leaving enough adhesive remnants.
5. Transfer the overlay to an existing Crosley control board. Attach the new overlay to your control board if it was purchased an overlay that is new.
6. Install the new Crosley oven control board: Place the electronic oven control board and then reinstall the mounting screws. Connect all wires to the Crosley oven controller board by using your digital image to serve as a reference.
7. Attach the Crosley control panel shield back shield. Set the back shield on the back console. Attach the back shield with mounting screws.
8. Turn on the gas supply and plug the power cord in to restart power.
Slide the Crosley range into the cabinet. Be sure that the rear leveling foot is properly aligned with the anti-tip bracket to ensure that the range doesn’t move forward when the oven door opens. Then, pull out the oven rack that is loaded. Use a helper if necessary.
While it might seem difficult to replace the Crosley oven control board, with the right tools and instructions, this is a straightforward task that will save you both time and money. In this post we’ve outlined the steps to replace a Crosley gas range oven control board, including removing the old board, installing the new one and then testing it to make sure that it’s working properly. These steps can save you the expense and hassle of hiring a professional to fix your oven. Remember to always take necessary safety precautions while using appliances and follow the instructions of your manufacturer if you are unsure. With a little bit of perseverance and some basic DIY skills, you can successfully replace your gas range oven control board, and then enjoy wonderful meals that are cooked to perfection.