Have you discovered that your Roper washer won’t start or has it stopped working altogether? This article will give an overview of the most common issues you must look for before making a call to a washer technician. There are a few simple things that you can do to fix your Roper washing machine won’t start. These might seem silly, but they could save you the trouble of calling a technician. Make sure you have power on and the device is plugged into. Inspect the outlet to ensure it is working. After that, verify if the fuse has been blowing. If not, confirm that the Control Lock or Delay start buttons are active. Sometimes, it is as easy as closing and opening the door to reset your Roper washer. These simple steps will save you money on unnecessary repairs, when your Roper washing machine doesn’t start.
How to fix Roper washing machine that won’t start
- Click the power button.
- Check out the outlet.
- If necessary, reset the outlet.
- Make sure that the power cord is plugged into.
- Verify that the circuit breaker has been thrown or fuses have been checked.
- Check to see if Delay Start was pushed.
- Check to see if the Control Lock is activated.
- When the cycle is complete, close and open the door.
In conclusion, if your Roper washing machine won’t start, there are several steps you can take to troubleshoot and fix the issue. First, check to make sure that the machine is powered in and the outlet is powered electricity. Check the lid switch as well as the door lock to ensure that they are working effectively. Also, examine the water supply to ensure there is sufficient water pressure.If none of the above steps will resolve the issue, it may be necessary to call an expert to seek further assistance. Remember to always refer to the manufacturer’s instructions and consult an expert if you have any doubts or questions.