A malfunctioning KitchenAid washer can be a major hassle, particularly when it refuses to make use of cold or hot water. It’s not just frustrating to be faced with dirty clothes, but it may also be costly to have an expert come in to repair the issue. Many issues with the hot or cold running water in a KitchenAid washer can be easily addressed by the home owner.
In this post, we’ll examine the common causes of a washing machine with cold or hot water that isn’t working and offer step-by-step guidance on how to resolve the issue. We’ll assist you in determining the cause of your thermostat and test the supply of water. If you’re faced with a stubborn machine or simply wish to save money for repairs, continue reading for tips on how to repair a KitchenAid washing machine that has no hot or cold water.
Inlet Hoses & Screens:
KitchenAid washing machines are connected to the home water supply through fill hoses. They are usually around 4-5 feet long and often will have the appearance of a wire or plastic screen built into the end of the hose that attaches to the faucet. This screen is designed to prevent sediment from getting into the water valve of the appliance. It’s located at the rear of the. How to check the condition of your KitchenAid washing machine’s screens and hoses:
1. First, make sure the faucets and hoses are clean.
2. Shut off the faucets. disconnect the fill hoses from the valve at the inlet and inspect the screens that make up the valve. It is recommended to clean out any debris or sediment. In order to determine whether you have the water pressure to fill your hoses, put the ends of the hose into a tub or bucket and switch on the faucet.
3. If you have minimal pressure then check the screens within the hose for signs of dirt accumulation or any damage.
4. If you find any issues during these inspections, you’ll require KitchenAid replacement hoses and screens.
Water Inlet Valve:
The Water Inlet Valve on your KitchenAid washing machine supplies hot and cold water to the rinse and wash. Two solenoids regulate the inlets , which supply cold and hot water. The valve can be controlled by the timer, electronic control, and water temperature cycle selector. The valve is controlled via the timer or electronic control as well as the water temperature/cycle selector switch, and the water level/pressure switch. How to test the water intake valve in theKitchenAid washing machine using a multi-meter
1. Before you start this inspection ensure that the washing machine is unplugged from the power and water supply.
2. In order to remove the valve to test, remove all or a portion of your KitchenAid washer cabinet. The valve should be located right behind the hose connectors.
3. Check the KitchenAid washer’s valve for cracks, damage or wear. The valve has screens inside it that could have gathered up dirt or debris, in which case it must be meticulously cleaned. If the screens get damaged the valve will have to replace the entire valve.
4. The resistance of a properly functioning valve can vary between models. Refer to your manual to learn what your reading should be. To test for continuity, place the probes onto the valve’s terminals and use your multi-meter set for Rx1.
5. If you do not receive an indicator of continuity, you’ll require an KitchenAid replacement water inlet valve. Lid switch The lid switch for top-loading KitchenAid washing machines is a security device that stops the motor circuit from running in the event that the lid is open. Some models also feature a valve for water inlet which can be controlled. If the lid switch fails on these models the power cannot be supplied to the water valve.
If you’ve discovered that the water inlet valve of your KitchenAid washer isn’t receiving power, you must inspect the lid switch. How to check the lid switch on aKitchenAid washing machine:
1. Before you begin, make sure that the KitchenAid washer has been unplugged.
2. To locate the switch, you have to remove the cabinet or top panel. After you locate it, verify that the levers and actuators are not damaged or sticking and that the switch is being operated mechanically.
3. If there are no problems, you can remove the switch to check for continuity. Then , set your multimeter to RX1 to confirm.
4. Press the button to turn on the switch. After that make use of the probes reach the terminals. The probes should touch the terminals with a force of zero to nearly zero.
5. If you do not receive the same reading, you’ll need an KitchenAid lid switch replacement.
Selector Switch Or Water Temperature Switch:
The selector switch, also known as a water temperature switch selects the water temperature to be used for the wash and/or rinse portions of the process. The switch is able to provide power to the correct solenoids on the valve for water inlet. The temperature selector switch may be the problem if you don’t have electricity to the solenoids of the valve to open the water. What to do to test a KitchenAid washing machine selector switch using a multimeter
- You will need to unplug the KitchenAid washer before you test the washer and take out electrical components.
- Take the selector switch off your appliance in order to check it out, you’ll need to disassemble every part or all of your washer’s cabinet to access it. In the majority of models, it is attached to the frame of the KitchenAid washing machine
- Each button on the switch is going to be tested one-by-one. Start by placing the probes onto the terminals for one button Your reading should be infinity at this point, press in on the button. This will alter your reading to zero and then press the other button, and this will change your reading back to zero.
- If the readings you get are different from the ones described above, you will need a KitchenAid alternative selector switch.
Water Pressure Switch:
The water level switch, which forms part of the circuit for water valves that is activated by pressure device. The control panel will usually contain this component. It is connected to the tub via the use of a hose, or an air dome tube. This switch can be found below the tub in KitchenAid washers that have electronic controls. If the switch is damaged and is not functioning properly, it could not provide power to the valve used to supply water. How to examine the level of water on the KitchenAid washer:
- Before you start, unplug the power supply to the KitchenAid appliance.
- A faulty air dome or switch could cause similar symptoms to the malfunctioning switch. The cabinet of your washer should be opened to identify the issue and remove the air dome hose. Close one end, then blow the other one while the hose is submerged the water. No bubbles should be evident.
- Take the switch off the appliance to inspect it for indications of wear, damage, or cracking. It will likely be located in the sump , under the tub or in the area behind your control panel.
- If you notice any flaws on your part while carrying out the above checks, you may need a KitchenAid replacement water level switch.
Timer Or Electronic Control:
The timer or electronic control will determine whether the valve that is used to supply water receives power. The mechanical timer has a series of electrical contacts operated by a small motor and cams. During the fill, wash and rinse fill parts of the cycle, these connections will provide power to the water inlet valve circuit. What can you do to check the control of the timer in aKitchenAid washing machine using an multi-meter
1. Unplug your KitchenAid washing machine and take off your appliance’s control panel and rear panel to find the timer.
2. The timer must be removed from your KitchenAid washer. Don’t pull the wires directly instead pull on the connectors.
3. The probes should be placed at the motor’s end. You are testing for continuity. You should see an error of zero or nearly zero.
4. If your test results in an unrelated result it is time to get a KitchenAid timer replacement. A KitchenAid washer that does not have hot or cold water is an unsettling issue that may be challenging to fix, but it’s often quite simple. If you follow the steps described in this post, you will be able to troubleshoot and fix common issues such as clogged pipes, faulty valves, and incorrect water temperature settings. Make sure you unplug the KitchenAid washer prior to attempting repairs.
If you’re unsure about any aspect of the process, it is best to read the instruction manual from the manufacturer or call a professional for assistance. It is possible to get your KitchenAid washer working again quickly and efficiently with a little patience and time. It will also save you the hassle of washing clothes and the expense of repair.