How to Fix Hoover Washer That Has No Hot or Cold Water

A broken Hoover washer can cause real hassle, especially when it won’t use cold or hot water. It is frustrating to wash your clothes that are dirty and also costly to employ a professional to fix the problem. However, most issues with hot or cold water inside a Hoover washer are easily fixable by the owner. We’ll discuss the most common causes your washer doesn’t have hot or cold water and provide step-by-step solutions. From checking the water supply to resolving the thermostat issue, we’ll cover all you’ll need to know in order in order to get your washer operating efficiently once again. If you’re struggling with a problem with your machine, or simply want to save money on repairs, read on to find out how to fix a Hoover washer that doesn’t have hot or cold water.

Inlet Hoses and Screens

Hoover washers connect to your household water supply using fill hoses. They are usually 4-5 feet in length and will usually include wire or plastic screen that is inserted at the end of the hose that attaches to the faucet. This screen stops debris from entering the appliance’s water inlet valve. It is located at the rear of the. How to examine the screens and hoses of theHoover washing machine

1. This is a simple check; you do not have to take apart the washer. Check that the hoses are not damaged and that the faucets are completely open.
2. Shut off the faucets remove the fill lines from the inlet valve and check the screens.
3. Remove any dirt or debris. In order to determine whether you have the water pressure to fully fill your pipes, place the ends of the hose in the bucket or tub and switch on the faucet. Make sure the hose’s screen is free of dirt or damage in the event that you do not have enough pressure.
4. It is recommended to replace screen and hoses from Hoover in the event that you spot any problems during these examinations.

Water Inlet Valve

The Water Inlet valve in your Hoover washing machine is able to supply hot and cool water to the wash and rinse. Two solenoids will control the inlets that supply cold and hot water. The timer or electronic control, water temperature cycle selector and the water pressure switch operate the valve. The timer, electronic control water temperature/cycle selector, and pressure switches control the valve. How to examine the water inlet valve of aHoover washing machine using the help of a multimeter

1. Before you start this inspection ensure that the washing machine is unplugged from the power source and water supply.
2. In order to remove the valve to test, you’ll need to take out all or part the Hoover washer cabinet. You will find the valve just behind the hose connections.
3. For evidence of cracking, damage or wear, you can visually look at your Hoover washer’s valve. The valve is equipped with screens within it that could have gathered on debris or dirt. if so, it should be thoroughly cleaned. If the screens get damaged it is necessary to replace the entire valve.
4. The resistance of a working valve is different from model to model. refer to your owner’s manual to determine what the result of your test should be. Put the probes onto the valve’s terminals with the Rx1 setting on your multimeter. If you’re not getting continuity, you can use an Hoover replacement valve for the inlet.

Lid Switch

The lid switch in a top load Hoover washing machine is a security device created to prevent the motor circuit from working when the lid is closed. On some models, the water inlet valve circuit can also be controlled. Some models feature lid switches that control the power source. If you’ve determined that the water inlet valve in your Hoover washer isn’t receiving electricity, you need to examine the lid switch. How to test the lid switch on a Hoover washing machine

1. Before you start, make sure that the Hoover washer is not plugged in.
2. To locate the switch you must take the cabinet off or the top panel. Once you’ve found it, make sure that the actuators or levers aren’t squeezing or damaged and that the switch is operated mechanically.
3. If there are no issues above, take the switch off to check for continuity and set your multimeter at Rx1.
4. As you press the switch’s button, press the terminals using the probes. The probes should be able to touch the terminals with a force between zero and almost zero.
5. If you have a reading that is not zero or close to zero, you’ll require replacing the Hoover lid switch.

Selector Switch or Switch for Water Temperature Switch

The selector switch, also known as a water temperature switch selects the water temperature to be used for the rinse and wash portions of the cycle. This switch is utilized to supply power to the appropriate solenoids on the water inlet valve. If you do not have electricity to the solenoids located on the water inlet valve, then the temperature selector switch may be in error. How to test theHoover washing-machine selector switch using the aid of a multimeter

1. Since you’ll be removing and testing electrical components, make sure that you unplug your Hoover washer prior to starting.
2. Take the selector switch off your appliance in order to test it, you will require disassembling every part or all of your cabinet of your washer in order to reach it. In many models, it’s connected to the frame of the Hoover washing machine.
3. You will be testing the switches’ buttons one at each time. Start by placing probes onto the buttons’ terminals. The reading should be infinity. After that, press the button and the reading will change to zero. Press the button to switch the reading back into infinity.
4. If you get readings that aren’t in line with the previous descriptions It is necessary to replace the selector switch by Hoover.

Water Pressure Switch

The water level switch, which is a part of the water valve circuit, is a pressure activated device. It is typically located in the back of the control panel, and it will contain a hose, or a dome tube connecting it to the tub. The switch is located underneath the tub on Hoover washers with electronic controls. If the switch is damaged it might not be able to supply power to the valve that opens water. Test the water level switch on a Hoover washing machine

1. As with most repairs, disconnect the power source to your Hoover appliance before starting.
2. A malfunctioning air dome or switch could cause similar symptoms as the defective switch. Determine if the hose is the cause by opening your cabinet to your washer and taking out the air dome the hose. Seal one end and blow the other one while it is still submerged in the water. There shouldn’t be any bubbles evident.
3. To look over the appliance to find indications of wear, cracks or damage or any other issue Remove the switch. The switch is most likely located on the bottom of the sump beneath the tub, or in the area behind the control panel.
4. If you discover any defects in your components while conducting the above checks You may require a Hoover replacement water level switch.

Timer or Electronic Control

The timer or electronic control will determine when the valve for water inlet receives energy. A set of electrical connections comprise the mechanical timer. These contacts are controlled by tiny motors as well as cams. During the fill, wash and rinse parts of the cycle, these contacts provide power to the water inlet valve circuit. What can you do to check the control of the timer in aHoover washing machine with a multi-meter

1. To find the timer, disconnect your Hoover washer and then take off its control panel and rear panel.
2. Remove the timer from the Hoover washer. Don’t pull directly on the wires, instead pull on the metal connectors connected to the wires.
3. Set your multimeter to Rx1, and while pressing into the button (if applicable) connect the probes on the terminals which control the motor (refer to the wiring diagram). The test for continuity will give you a reading of zero to nearly zero.
4. If your test produces a different reading, you will need a Hoover timer replacement. In conclusion it is clear that a Hoover washer that has no hot or cold water may be a hassle to address, however, it’s usually an easy fix.

By following the instructions in this post, you’ll be able to diagnose and fix common issues such as clogged pipes, malfunctioning valves, and improper water temperature settings. Always unplug the Hoover washer prior to attempting any repairs, and if you are unsure about any aspect of the procedure you should consult the manufacturer’s manual or contact a professional for assistance. With just a little patience and time you’ll be able to get your Hoover washer operating smoothly and efficiently, saving your time and effort from dirty laundry and the expense of repairs.