You are not the only person who is wondering why your Crosley washer is draining concurrently. This is a frequent issue and is caused by a variety of factors. We’ll discuss the most frequently cited causes and providing step-by-step instructions for fixing an appliance from Crosley that fills and drains simultaneously. This guide is for those who are a skilled DIYer or an amateur. This guide will help you understand how to fix your Crosley washer back to normal and in good working order no matter what level you’re in at.
Water Inlet Valve: The water inlet valve in your Crosley washing machine allows you to fill the tub with cold, warm or hot water to wash and rinse cycles. The valve is operated using electric solenoids that are controlled by the electronic control board or timer and the water level control/water level selector switch, or the pressure switch. If your Crosley washer is filling up during a drain cycle then the valve that allows water to enter may be at fault. If the issue persists you should unplug the washer. If the Crosley washer continues to fill, the inlet valve is defective. The problem could be related to the circuit that controls the valve. How to test the valve for water inlet in the Crosley washing machine with a multi-meter
- Before starting, you must disconnect the power source and the water supply source to the Crosley washer.
- To test the valve, take it out. It is hidden in the hose connection. To take the valve off, you’ll need to take apart the cabinet of your washer.
- There may be screens inside the valve that are blocked by dirt and particles. It is recommended to clean any dirt or debris that you encounter. These screens are not sold as a separate item and will need to be replaced should they become damaged. You should also inspect the outside of the valve for wear, damage, or cracks.
- Your owner’s manual will give the resistance readings needed for functional valves. They differ among Crosley washer models. Once you have a clear idea of the reading you should get Set your multi-meter at Rx1 and then connect the probes to the valve’s terminals.
- If this test indicates that the valve doesn’t have continuity, then you’ll require an Crosley replacement water inlet valve.
Water Level Switch Pressure Switch & Air Dome Tube
The water level switch is a switch that operates under pressure that helps determine the correct water level in the tub. The control panel will usually contain this feature. It could also be equipped with an air dome tube or hose, which connects the tub. For Crosley washers that use an electronic control switch, the switch might be located in an area called the sump that is beneath the tub. The water will fill up the tub and compress the air inside, pushing against the diaphragm. The switch controls the water inlet valve and shut off the valve at the correct water level. How do you check the level of water in a Crosley washing machine
- Since you will work with electrical components, make sure that you’ve disconnected your appliance before beginning.
- Start by opening the Crosley washer’s cabinet and taking the air dome out. Set the hose in the water to seal one end and blow into the second. If bubbles start to rise to the surface, you will require a new air dome hose.
- Examine the switch and hose for any signs of fraying or cracking wear or damage.
- If you discover that your switch is broken and you require an Crosley replacement water switch. In the end, the Crosley washer that drains and fills up simultaneously could be a frustrating problem to resolve however, with the proper expertise and the right tools this issue is fixable. It’s easy to fix the most frequently encountered issues, like a blocked drain hose, faulty water inlet valve or an issue with the pressure switch. To learn more, make sure to consult the Crosley washer owner’s manual. Also, disconnect your appliance before beginning any repairs. With a little bit of patience and experience, you’ll have your Crosley washing machine running like new in no time.