A refrigerator is an essential appliance for every household. It helps keep our food and drinks fresh and chilled. It can be a hassle and a pain to not be able to displace ice. The Whirlpool refrigerator may not be able to dispense Ice due to an issue with the motor of the dispenser or a water filter that is blocked or an issue with the maker. We’ll discuss common issues and the best way to fix your Whirlpool Refrigerator’s Ice Dispenser. It is possible to save money by hiring a professional to repair your appliance and avoid the have to purchase a new one.
Whirlpool Ice Bucket Auger Motor
The Whirlpool Ice Bucket Auger is in the ice bin. If the dispenser is turned on, it will rotate to push the ice towards the chute that is at the outlet of the bin. A motor is installed behind the bin, and set drive forks are connected to the gearbox’s shaft shaft. While the gear box is slow, it is equipped with plenty of force to move the ice. It is important to confirm that the motor is functioning before turning the auger. It is common to hear the gear box or motor producing enough sound to be heard even with the freezer door shut.
It is possible to test for continuity with an instrument such as a multimeter, if the motor isn’t functioning. Before you perform this test switch off the power source to the appliance. It is important to ensure that the motor is getting power from the ice maker you have selected, If it is in continuity. This is an actual voltage test and must be performed by a qualified technician. It is recommended to inspect the switches and actuators that control the motor in the event that no power is supplied to the motor terminals.
Whirlpool Ice Dispenser Actuator
The part of the mechanical that triggers the micro switch in your dispenser is known as the ice dispenser actuator. The actuator is typically small, plastic lever that rotates when the tumbler is pressurized. It could be covered with an upholstered pad. The switch is likely to click when it is hit. It is recommended to inspect the actuator or switch if the door to the dispenser and motor for the auger aren’t receiving the required power. Remove the cover of the control panel to ensure that the actuator is connected correctly the switch for the dispenser. If not, check the mounting bracket for the switch as well as the pivot of the actuator and housing bracket for the actuator. Repair any damaged components. It is necessary to replace the defective part when the actuator is in contact with the switch. If you are working near electrical circuits, it is recommended to remove the power source to the device.
Whirlpool Micro Switch
Momentary contact switch, also known as the micro switch for the dispenser, is utilized to turn on the motor of the auger. It is situated behind the pad or lever that is used to dispensate the ice. To open the switch, first, switch off the power source. Then, you must remove the cover off the panel. Multi-meters can be used to check the continuity.
Whirlpool Dispenser Control Board
Whirlpool refrigerators can use an electronic control to supply electricity to the motor or the dispenser door solenoid. It is possible that you have a malfunctioning Whirlpool electronic controller when they cease to power , and the actuator or switch isn’t working correctly.
A Whirlpool refrigerator that isn’t able to displace ice is a source of frustration. There are a variety of solutions you can test before making a call to an expert. Fix the issue yourself by following the suggestions that are described in this post. This can help you save time and money. Make sure you check the dispenser’s water filter and motor for any issues. Be patient as you wait for fresh ice to be created. It is possible to get the Whirlpool refrigerator to continue to dispense regular ice with minimal effort. This will ensure that your beverages stay cool and refreshing all entire year.