A refrigerator is an essential appliance in any home, keeping our beverages cold and fresh. However, if it stops dispense Ice, it can be frustrating and inconvenient. There are several reasons why your Speed Queen refrigerator may stop dispensing ice, for instance, a damaged dispenser motor, a jammed water filter or a malfunctioning ice maker. In this post, we’ll cover some common troubleshooting steps to assist you in fixing the issue with your Speed Queen refrigerator’s ice maker and get it back up and running. With a little bit of know-how, you’ll save money on a service call and avoid having to buy an entirely new appliance.
Speed Queen Ice Bucket Auger Motor
The Speed Queen Ice Bucket Auger is located inside the ice box. When the dispenser is activated , it is able to rotate and move the ice towards the chute that is at the outlet of the bin. A motor is installed behind the bin. A set drive forks have been attached to the gearbox’s shaft shaft. Although the gear box is not fast, it packs lots of force to move ice. If the auger is not turning , it is important to first make sure that the motor is working. You should be able to hear the motor/gear box making enough noise to be heard with the freezer door shut.
If the motor is not functioning, then check the continuity of the motor using an instrument such as a multi-meter. Before performing this test make sure you turn off the power supply to the appliance. If the motor has continuity then you should verify that the motor is getting power when ice dispenser is selected. This is an live voltage test which is only performed by certified personnel. If there isn’t any power delivered to the motor’s terminals, you must inspect the control actuator and switch.
Speed Queen Ice Dispenser Actuator
The ice dispenser actuator is the part that mechanically activates the dispenser micro switch. It’s usually a lever that is moved by your tumbler, and it could be covered by a an upholstered pad. It is common to hear clicking when the switch contacts. The actuator should be inspected or switch if the door to the dispenser and auger motor are not receiving energy. Remove the cover on the control panel to ensure that the actuator is connected effectively the dispenser switch. If not then inspect the switch mounting bracket along with the actuator pivot and actuator housing bracket. Replace any defective parts. You will need to replace the defective part whenever the actuator touches the switch. When working in proximity to electrical circuits, remove the power source to the device.
Speed Queen Micro Switch
Momentary contact switch, the micro switch for the dispenser, is used to activate the motor for the auger. It is located behind the pad or lever which is used to dispensate Ice. To gain access to the switch you will first need to remove the power supply. Next, remove the cover from the control panel. You can check the power supply to the switch with a multi-meter.
Speed Queen Dispenser Control Board
Certain models of Speed Queen refrigerators use an electronic control that supplies energy to the auger motor and the dispenser door solenoid. It could be that the controller is defective. Speed Queen electronic controller if they aren’t getting power and the actuator or switch isn’t functioning properly.
A Speed Queen refrigerator that doesn’t have the ability to dispense ice can be a snare. There are a variety of solutions you could try before calling a professional. By following the steps outlined in this article, you’ll be able to diagnose and resolve the issue yourself, saving time and money in the process. Make sure you check the water filter and dispenser motor for any problems. Be patient while you wait for new ice to be created. With just a little effort you’ll be able to get your Speed Queen refrigerator back to dispensing ice like normal, ensuring your drinks stay cool and refreshing all through the year.