The Kenmore refrigerator water inlet valve is a vital element that supplies water to the ice maker and water dispenser. It is prone to problems including low water pressure as well as no ice creation, leaks or no any ice. Thus, finding a defective Kenmore water inlet valve for your refrigerator is vital to ensure proper functioning of your refrigerator. This article will give you steps-by-step directions that will help you diagnose a faulty Kenmore refrigerator’s water inlet valve. It will also cover typical symptoms and tests that you can use to determine the cause. After reading this guide, you’ll be equipped to determine and fix the issue to save the time and money spent on repair services.
Where can you find the Kenmore refrigerator water valve for the inlet to the fridge
To test the Kenmore refrigerator water valve, unplug the power cord and shut off the water supply to the refrigerator. Most foods can be stored in the refrigerator for until they are shut. The valve will need to be monitored every 30 minutes. Make sure your hands are protected with gloves. The water valve is usually found at the bottom back of the Kenmore refrigerator. The Kenmore water inlet valve can fail mechanically or electrically.
Inspecting the valve for an electrical issue
You can look for an electrical issue by accessing the Kenmore refrigerator’s water valve that is typically located in the lower part of the cabinet. You can use an analog or digital multimeter to check continuity-good electrical current-of the valve solenoid coils.
Remove the supply line for water connected to the valve. Also, remove the cables from the terminals located on the solenoid coils. The number of coils will differ depending on the model and each coil is equipped with two terminals.
Set the multimeter on the lowest Ohms of resistance setting, and make sure the meter is calibrated properly.
Place one probe on each terminal. Then put the second probe on the opposite terminal. Make this process happen for every solenoid coil.
If the meter reads infinity Ohms resistance, but the digital display does not change or the needle doesn’t move on an analog meter, then the valve is defective and has no continuity.
Examining the valve to determine if it is experiencing mechanical problems
It is the easiest way to identify a problem in the supply of water to identify mechanical issues.
Connect the water supply line to the Kenmore water valve.
Put a bucket on the end of the water supply line.
The water should be turned on at the line for supply and test the flow.
The problem could be with your water supply if water flow is slow or uneven. An uninterrupted, continuous flow could mean that the Kenmore valve has become blocked or blocked.
In the end, a damaged Kenmore water inlet valve can cause a wide range of issues that could affect the operation of the ice maker in your refrigerator and water dispenser. But, if you follow the step-by step guideline provided in this article, you will be able to identify the problem and possibly solve it yourself without needing to contact a repair service. Always take safety precautions when working with electrical components or water. If the issue is not resolved, or you are unsure how to carry out the tests and tests, you’re advised to consult an expert technician. By taking care of your refrigerator’s water-inlet valve, you can be sure that it will function properly and provide you with clean, fresh tasting water and frozen ice for many years to be.