A Haier washer that fails mid-cycle can be an issue that is confusing and frustrating to handle. It can be frustrating to have to start the process over again, and it can also result in costly repairs if the issue persists. However, many of the reasons for a Haier washing machine not working mid-cycle can be fixed by the home owner.
The following article will cover the most common reasons Haier washing machines stop mid-cycle and offer the steps to fix it. We will help you troubleshoot the timer and check the lock on your door to make sure your Haier washer is running smoothly once again.
So, whether you’re faced with a troublesome Haier model or just need to cut costs for repairs, continue reading to learn how you can repair a Haier machine that has stopped mid-cycle. Incoming power problems Make sure the power cord is tightened. It must be connected tightly to ensure that there is constant electrical power to your Haier washer.
Washing Machine Control Board
A Haier washing machines control board supplies voltage to nearly all electronic parts. If the control board is damaged, the washer may stop at mid-cycle. The board may be inspected for signs of burnt or damaged components. You may also utilize a multimeter to check the power output connections of the board following a review of the wiring diagram for the appliance.
Washing Door Lock Motor and Switch Assembly
The Haier door lock keeps the door of the washer to keep it closed while in operation. The Haier washer will begin operating once the door has been shut. The Haier washer won’t begin running in the event that the Haier door isn’t closed. If the door lock is defective, the washer may stop mid-cycle. Door locks could fail mechanically or electronically. The door lock should be inspected to see if it is damaged. Replace the lock if it’s broken or does not latch properly. Washing machine lid switch assembly This blocks the washer from spinning when the lid is open. If the lid switch assembly fails, the washer may stop mid-cycle. To check if the lid assembly is defective, use an instrument to test each lid switch for continuity. Replace the lid switch that doesn’t have continuity.
Insufficient water supply
Make sure the cold water is flowing into the tub. If the flow of cold water is not flowing smoothly or does not enter the tub in any way or not flowing at all, the Haier washer will stop at the beginning of the rinse cycle waiting for the tub to be filled. It could be due to the water inlet valve being blocked, a partially closed main water supply valve or low water pressure from your home.
Washing Machine Water Inlet Vave
The valve to inlet water is open during the rinse cycle to allow water to get to the tub for washing. If the valve that allows water to enter the wash tub is damaged, the washer will wait for water to enter the washer, causing it to stop mid-cycle. To identify if the water intake valve is not functioning, use an instrument to check it for continuity. Replace the water inlet valve to ensure it has continuity. Drain pump for washing machine The Haier washing machine drain pump aids in draining the water from the tub. It force water through pipes or drain tubes that connects to a laundry tub. Because water can be draining from the tub many times during the wash cycle and a malfunctioning drain pump can stop the machine in mid-cycle. If there’s still water in the tub even after the washer is stopped, look at the drain pump for obstruction. To verify that the drain pump is functioning correctly, you can test it with the multimeter.
Washing Machine Main Control Board
The main control board could be defective. But, the control board is rarely the cause of this issue. Before replacing the control board in the main be sure to check all the most frequently defective components. Washing Machine Timer – The timer may be defective. It’s easy to miss the mark on the timer. When replacing it, make sure you check for any other part that is defective. To determine if the timer is defective, consult the wiring diagram of your washer and make use of a multimeter in order to test the timing mechanism for continuity. A Haier washing machine that stops halfway through its cycle can be frustrating, but it’s generally an easy solution.
By following the steps outlined in this article, you will be able to troubleshoot and repair common problems like blocked filters, malfunctioning door locks and improper timer settings. Make sure you unplug your washing machine prior to attempting any repairs. If you’re uncertain about any aspect of the procedure, it is best to go through the manual of the manufacturer or contact a professional for assistance. It is possible to get your Haier washer machine working again by putting in a bit of patience and a few minutes. This will prevent the time of starting the cycle over and also reduce the cost of repairs. Make sure you keep an eye on your machine and determine if the issue is still there and take any necessary action.