If your Haier washer isn’t responding Begin by ruling out the obvious: is it not plugged in? Does the circuit have a problem? It is possible to determine whether the circuit trip is taking place by plugging in a hair dryer into the outlet. If the dryer doesn’t work, then the wiring in the outlet is the problem. Have an electrician repair the electrical outlet. If the hair dryer is working however, it is possible that there is a wiring problem in the washer. Here are the steps you can take to test the wiring in your Haier washer:
- Unplug your Haier washer. Verify the power cord for damage. Replace the power cord if damaged.
- Check the wire connections to the control board’s main circuit or the timer. Connect any wire that is loose.
- If your Haier washing machine has digital displays, verify the connections to the control board that controls the washer and the board for the user interface. Reconnect any loose wires for the user interface. You may need to replace either the control board that controls your main appliance or the user interface board, if the wiring connections are in good working order.
Before replacing control components, it’s recommended to make an Haier service technician check the Haier washing machine’s control boards and user interface boards. Testing the controls usually requires live voltage checks. Because they can be dangerous, we don’t recommend you do a live voltage test on your Haier washer. Replace the Haier main control board for the washer The main electronic control board, sometimes referred to the mother board regulates the timing and execution of washer’s component functions. It controls the fill valves as well as the drive motor, and the drain pump.
Replace the Haier washer timer: The timing device -also known as a cycle selector is the dial that you use to control the cycle of the Haier washing machine with mechanical controls. The washer runs its cycles from initial filling up until the last spin through the timer. Replace the timer if it fails to move the washer through its cycle. Replace the Haier washer user interface board: The user interface board contains the buttons you press to initiate the wash cycle. Replace the user interface board in case one or more of the buttons do not work. In conclusion, a Haier washer that doesn’t work in any way can be a stressful and overwhelming issue to tackle. H
omeowners can solve a number of causes why a Haier appliances isn’t functioning. The article covered some common causes of an appliance from Haier not functioning, including power supply, water supply, and control issues, and explained step-by-step steps on how to fix the problem. Before making repair work on the Haier washing machines, be sure to unplug them. If there are any issues you should consult the manual or talk to a professional. With a little bit of patience and time it is possible to get your washer working flawlessly again and save the cost of repairs. Sometimes, the issue could be more complex. If this is the case it is recommended to call a professional immediately.