Have you discovered that your Maytag washer won’t start or has it stopped working altogether? This guide will offer brief checklists of typical problems to be able to identify prior to calling a washer repairman. There are a few simple things that you can do to fix your Maytag washing machine won’t start.
These might seem silly, but they could save you the trouble of calling a technician. Make sure that you have power on and the device is plugged into. To confirm that it’s working, you should inspect the outlet. Next, check if the fuse has been blown. If these fail, verify that the Control Lock or Delay start buttons have been activated. Sometimes, it is as easy as closing and opening the door to reset your Maytag washer. These simple steps will save you money on unnecessary repairs, when your Maytag washing machine doesn’t start.
How to fix Maytag washing machine that won’t start
- Click the power button.
- Check out the outlet.
- If necessary, reset the outlet.
- Make sure that the power cord is plugged into.
- Verify that the circuit breaker has been thrown or fuses have been checked.
- Check to see if Delay Start was pushed.
- Check to see if the Control Lock is activated.
- When the cycle is complete, close and open the door.
In conclusion, if your Maytag washing machine won’t start, there are several steps you can take to troubleshoot and fix the issue. First, make sure that the machine is powered on and plugged in. After that, test the lid switch as well as the door lock to ensure they are working correctly. Also, make sure that water pressure is sufficient and that the pressure is maintained.
If none of these actions solve the problem, it may be necessary to contact an expert for further assistance. Remember to always refer to the manufacturer’s instructions and consult an expert if you have any doubts or questions.